About Radius

Introduction

Leading the Way

The future is composites—we've known this for decades. When we started in 1986, other materials reigned supreme. But we saw the potential for strong, lightweight materials to radically transform a wide range of industries. Today, demand for composites aircraft structures is forecast to grow by 11% annually through 2027. We're uniquely suited to help our customers meet that demand.

Equipment & Services

  • Engineering Services
  • Tooling Design and Fabrication
  • Manufacturing Process Development
  • RTM & SQRTM Presses
  • Custom Workcells
  • Resin Injection Systems
  • Technology Transfer and Customer Support
Quality

AS9100 Certification

Radius Engineering, Inc. is certified to AS9100D and ISO 9001:2015. We believe that by standardizing our key processes and sharing common objectives across our organization, we are able to swiftly and flexibly meet our customers’ needs.

View our AS9100 Certificate.

Quality Manual

Radius Engineering’s Quality Manual outlines the structure of our organization, how our key processes interact, and highlights how we achieve and maintain a Quality Management System that complies and exemplifies the AS9100D and ISO 9001:2015 standards.

View our Quality Manual.

Supplier Performance

Radius Engineering focuses heavily on supplier relationships and performance. We believe the health of our suppliers is integral to our success. We require all suppliers to complete a rigorous self-assessment prior to earning approved supplier status, and we continually monitor supplier performance to ensure they remain capable of meeting our (and our customers’) requirements.

View our Supplier Self-Evaluation Form.

Supplier Terms and Conditions

Radius Engineering Inc. flows down AS9100D requirements on all purchase orders. Please review our terms and conditions for more information.

View our Supplier Terms & Conditions.

Facility

Where We Work

An advanced space for advancing composites. Our facility achieved a Gold LEED Certification (Leadership in Energy and Environmental Design) by the U.S. Green Building Council. It’s bright, open and conducive to mindful thinking, creative collaboration and bold project execution. One of Utah’s first privately owned, commercial LEED certified facilities, it emphasizes personal, corporate and community well-being—inside and out. Employees enjoy easy access to the adjacent Jordan River Parkway where they’re encouraged to walk, bike, cycle and clear their heads on a scenic trail system. Our commitment to the parkway runs deep. We recently installed a drinking fountain along the path and sponsored a team of 20 to participate in a trail-side conservation project.

Production Areas

16,000 sq. ft. facility on 2.5 acres 8,000 sq. ft. of high bay craned space (26ft. clear)

Solar Array
--kg
today
--t
total

In early 2020, in keeping with its LEED Gold Philosophy and certification, Radius completed the installation of a roof-top solar panel array consisting of 363 Solaria PowerXT panels and 3 SMA Sunny Tripower Core1 inverters. Achieving up to 20% efficiency and 20% more energy per square meter than traditional solar panels, this system generates maximum power in minimum space, with a maximum capacity of 156 Kilowatts (kW). The design of these panels is optimized for lower overall system cost, enhanced shade performance and visual appeal, and superior reliability/durability compared to other available systems. For example, in July of 2020, Radius achieved a peak power generation of 27.7 MWh.

Indoor plants at Radius Engineering are serviced and maintained
by Foliage www.foliageutah.com, specializing in indoor plants for homes, office,
and businesses for over 20 years.
"Bring calm to your space."

Radius Engineering from WedgeMedia.blogspot.com on Vimeo.

Management

Who We Are

Our management team includes engineers and managers who have extensive experience in the composites industry.

Senior Management
Dimitrije Milovich
President
Matt Howe
General Manager
Stacy Hadley
Chief Financial Officer
Elaine Abba
Human Resources Manager
Partners & Customers

We do business all around the globe. Our strategic European business partner is Coexpair.

Strategic Partner Coexpair

Coexpair was created via a technology transfer from Radius Engineering Inc. of best practices of engineering, tooling design, work cell and resin injector development resulting from Radius' previous 20 years of effort. Radius also collaborated with Coepair on best practices of marketing and executive leadership. Radius holds a 25 percent stake in Coexpair. The President of Radius, Dimitrije Milovich, is a member of the Coexpair Board of Directors.
Coexpair s.a.
10 rue des Entrepreneurs
5020 Namur
Belgium
Phone: +32 81 566 200

Sales Partners

Murakami Jitsugyo, Inc.
Kenzo Mitsuhashi
Manager, Tokyo Sales Office
Hanazono Kohen BLDG. 3F
20-13 Shinjuku 1 chrome Shinjuku-ku
Tokyo 160-0022 Japan
03-5269-3390
 
Murakami America, Inc.
Minoru Nishida
General Manager
2227 W 190th Street
Torrance, CA 90504
Phone: (310) 782-7900
Fax: (310) 782-9800

Customers

    North America
  • ATK
  • Air Force Research Laboratory
  • AEC - Albany Engineered Composites
  • Bell Helicopter
  • Boeing Defense and Space
  • Boeing Commercial Airplane
  • Boeing Helicopters
  • Boeing Phantom Works
  • Bombardier Aerospace
  • CTL Aerospace
  • GE Aviation
  • General Dynamics / Intellitec & Lincoln Composites
  • GKN Aerospace
  • Lockheed Martin Missile & Fire Control Systems
  • Lockheed Martin Skunk Works
  • Lockheed Martin Tactical Aircraft Systems
  • NASA: Johnson, Marshall, Langley and Glenn Space Flight Centers
  • Northrop Grumman
  • Raytheon Aircraft
  • Spirit AeroSystems
  • US Army Research Lab
    International
  • Airbus – UK
  • Airbus Research Center – France
  • Airbus /EADS - Germany
  • Airbus/CASA – Spain
  • Asco Industries – Belgium
  • BAE Systems – UK
  • CRC - Australia
  • DSO National Labs - Singapore
  • Dassault Aviation - France
  • Eurocopter – France
  • FACC - Austria
  • Fuji Heavy Industries - Japan
  • Hawker De Havilland – Australia
  • Mitsubishi Heavy Industries - Japan
  • SARMA Aerospace – France
  • Sabca - Belgium
  • Sonaca Aerospace – Belgium
  • Spirit AeroSystems - Scotland
  • Techspace Aero - Belgium
  • TAI - Turkey
  • Toyota Motor Company - Japan
History

Established in 1986, Radius Engineering remains privately owned today. Currently, the company employs 35 highly experienced and motivated people, who are rewarded by profit sharing and other outstanding benefits.

Early in our history our products included sporting equipment including snowboards, bicycle frames, and fishing poles. As our knowledge of composite structures grew, our projects included aircraft wings, rotor blades and control surfaces. As our knowledge and technology increased, we gained a reputation as a reliable supplier of specialized composite structure manufacturing equipment and engineering services.

Our customers include most U.S. aerospace companies and a significant number of international aerospace companies.

Radius Engineering's process development, closed mold tooling, workcell design, and injection systems are internationally recognized and acclaimed. Our unique approach allows us to transfer technology to our customers, and provide them with continued support for future innovation.

We have a proven record of successful commercialization. Project diversity is extensive, and includes: automobile seat frames, sailboat masts, prosthetic hands, ski poles and grips, archery bows, tennis racquets, bicycle frames, fishing poles, violin bows, airplane wings, wing control surfaces such as flaps and ailerons, helicopter rotor blades and flexbeams, aerospace bulkheads, and internal support structures for helicopters, airplanes, and jets. Customers include most of the U.S. aerospace companies and a significant number of international aerospace companies.

Tribute To Brett Josie 1964-2004

For fifteen years a fixture—a constantly moving and high-energy fixture—Brett helped put Radius on the composites industry map. As he moved through his day and various projects, his focused gaze migrated from one issue to another, from one person to another, from one problem to another. He seemed to hold all issues and problems in his head, working on them sequentially and simultaneously. Read more here.

Community

We are actively involved in our community and we support a variety of community development projects

Bike Path Drinking Fountain

We installed a drinking fountain on our property next to the Jordan River Parkway bike path.

Get into the River Service Project

We sponsored 20 of our employees to participate in the Jordan River Parkway Trail-Side Conservation Project Radius supported this local development project by sponsoring employee time to participate.

Ride Your Bike to Work day

We encouraged employees to participate in a Go Green to Workday. Employees traveled to work by bicycle, unicycle, train, and bus. We celebrated the day with a company sponsored BBQ.

Copyright © 2024 Radius Engineering.

Radius Engineering, Inc.
1042 West 2780 South
Salt Lake City, Utah 84119

info@radiuseng.com
Phone: (801) 886-2624
Fax: (801) 886-2113
>